Post-Construction Cleanup
Post-Construction & Renovation Cleaning in Dallas–Fort Worth
Serving Dallas–Fort Worth Metroplex, Texas
From new builds to major remodels across Dallas–Fort Worth Metroplex, Texas, we remove drywall dust, debris, adhesive residue, and paint splatter — leaving finishes gleaming and ready for handover or move-in.
- Rough, final & touch-up cleans
- HEPA vacuuming of drywall dust
- Debris pickup & hauling available
- Sticker, paint & adhesive removal
- Window & fixture polishing
- Coordination with Dallas GCs & builders
Trusted by Dallas builders & GCs
Construction dust travels through vents, settles in every crack, and bonds stubbornly to freshly painted trim. Our Dallas–Fort Worth post-construction crews use HEPA vacuums, microfiber systems, and non-abrasive cleaners to protect new finishes while removing every trace of the build process. We work on your GC's schedule — rough cleans between trades, final cleans before walk-through, and touch-ups before the buyer's first visit.
New builds, remodels & flips
Whether you're a Dallas homeowner completing a kitchen remodel or a developer wrapping a multi-unit project, our teams scale to fit — from 1,000 sq ft condos to 40,000 sq ft commercial spaces across Dallas–Fort Worth Metroplex, Texas.
### Why post-construction cleaning is its own discipline
A house is dirtiest in the two weeks after a builder finishes it. Drywall dust is fine enough to pass through standard vacuum filters and coats every horizontal surface, every vent, every light fixture, every inch of the inside of every cabinet. Painters leave overspray on windows and hardware. Trim carpenters leave sawdust in unexpected places. Flooring installers leave adhesive residue and sticker glue. Standard residential cleaners aren't equipped for it — that's what our Dallas post-construction crews are built for.
We use commercial HEPA-filter vacuums (99.97% capture down to 0.3 microns), extension poles to reach 10–20 ft ceilings, non-abrasive alkaline cleaners for freshly painted trim, adhesive removers that won't damage LVP or hardwood, and razor blades on glass to remove paint splatter and sticker adhesive. Every crew member is trained on construction-site PPE (steel-toe boots, safety glasses, respirators when dust levels warrant) and OSHA basics.
### The three-clean model most Dallas–Fort Worth builders use
**Rough clean** — happens between trades once framing, drywall, and rough MEP are done. Bulk debris removal, sweep, initial dust knock-down, and site tidy so finish trades can work efficiently. Usually 4–8 hours for a 2,500 sq ft home.
**Final clean** — happens after all trades are out and the site is punch-list ready. Full HEPA vacuum of every surface (walls, ceilings, vents, cabinets inside and out), sticker and adhesive removal from windows and fixtures, paint splatter removal, hand-polish of interior windows, detail of hardwood or LVP with manufacturer-approved cleaner, appliance interior and exterior, and full sanitize of bathrooms and kitchens. Usually 8–16 hours for a 2,500 sq ft home.
**Touch-up clean** — happens the morning of buyer walk-through or hand-off. A one-hour pass to remove any dust that settled, wipe fingerprints from door hardware and appliances, and re-detail bathrooms and kitchens. This is what turns a clean house into a spotless first impression.
### Commercial post-construction across Dallas–Fort Worth Metroplex, Texas
For commercial builds — new office fit-outs, retail buildouts, medical office renovations, and multi-family lease-ups — we right-size the crew to the deadline. A 10,000 sq ft office fit-out typically takes a 4–6 person crew two shifts. A 40-unit apartment lease-up we'll staff to hit the leasing office's move-in schedule. We coordinate with your superintendent on power, water, elevator access, and staging areas.
### What we need from your Dallas team
Access — a lockbox code, key, or on-site super. Power and water. A dumpster on-site if debris hauling is in scope. A clear scope of work (which trades are done, which finishes need protection, any warranty concerns). Give us those and a firm deadline and we'll return a written quote within one business day.
Local to Dallas–Fort Worth Metroplex, Texas
- Coordinated with GCs across Dallas, Frisco, and McKinney
- New-build clean-outs in Prosper, Celina, and Little Elm
- Uptown, Downtown, and Deep Ellum commercial buildouts
- Corporate fit-outs in Legacy West, Plano, and Las Colinas
- COI naming Texas GCs and property owners same day
- Summer-ready: dust-control on HVAC intake, hydration for crews
What's included in every Dallas visit
Dust Removal
- HEPA vacuum all surfaces
- Vents & registers
- Inside cabinetry
- Light fixtures
- Ceiling fans
- Baseboards & trim
- Wall wipe-down
- Door frames
Surfaces
- Sticker & label removal
- Paint splatter removal
- Adhesive residue
- Fingerprints on glass
- Fixture polishing
- Grout haze removal
- Hardware polish
- Countertop detail
Finishing
- Interior windows polished
- Floors detailed
- Appliances inside/outside
- Bathrooms sanitized
- Debris haul-away
- Final walk-through
- Touch-up on request
- Signed completion log
Licensed, bonded & insured
Every Dallas team member is background-checked, W-2 employed, and covered by our commercial liability policy.
24-hour re-clean guarantee
If anything on the checklist isn't right, we'll return within 24 hours and make it right — no charge.
Eco-friendly by default
Family- and pet-safe products, HEPA vacuums, and color-coded microfiber that prevents cross-contamination.
Frequently asked questions — Dallas
+Do you work directly with Dallas GCs and builders?
Yes. Post-construction is one of our largest commercial verticals in Dallas–Fort Worth. We're on standing rosters with several general contractors across Dallas–Fort Worth Metroplex, Texas and can coordinate rough, final, and touch-up cleans on your build schedule.
+What's the difference between a rough, final, and touch-up clean?
Rough clean happens between trades — bulk debris removal, sweep, initial dust knock-down so finish trades can work. Final clean happens after trades are out and before walk-through — full dust removal, sticker and adhesive removal, fixtures polished, floors detailed. Touch-up happens just before hand-off — one more pass to remove any dust that settled or fingerprints left during walk-throughs.
+Do you provide your own equipment or use ours?
We bring everything: commercial HEPA vacuums, extension poles for high dust, non-abrasive cleaners for new finishes, microfiber, ladders, and PPE. We coordinate on-site power and water needs with your superintendent.
+How quickly can you mobilize in Dallas?
For most Dallas–Fort Worth projects under 20,000 sq ft we can mobilize a crew within 48 hours. Larger projects or multi-phase builds are best scheduled a week or two in advance so we can right-size the crew.
+Are you insured for construction sites?
Yes. We carry commercial general liability and workers' comp appropriate for post-construction work across Dallas–Fort Worth Metroplex, Texas. We can name the GC and property owner as additional insured, and our COI is available same day.
+What about window and floor detailing?
Both are included in our final clean scope. We hand-polish interior windows (exterior on request), remove protective film, and detail LVP, tile, or hardwood per the manufacturer's care recommendations.
Ready for a spotless Dallas space?
Serving Dallas–Fort Worth Metroplex, Texas with licensed, bonded, and insured teams. Free quotes, no long-term contracts.